Mortars
-
Tenon® Adhesive Base Coat PM
Tenon® Adhesive Base Coat PM (BOM# 114899) is a dry-mix, polymer-modified adhesive and base coat requiring only water for mixing.
-
Tenon® Masonry Veneer Mortar PM
Tenon® Masonry Veneer Mortar PM (Polymer-Modified) (BOM #120461) is a high-performance, multi-purpose, polymer-modified mortar, used for both traditional thick bed scratch and base coats and as the bonding mortar for installing real or manufactured masonry veneer units. A blend of cementitious materials, oven-dried sand, and special performance admixtures creates both a mechanical and chemical bond to the substrate, significantly outperforming standard Type S and N mortars. Can also be used for grouting yet it is excellent for applications such as dry stack where mortar joints are not used. Meets the requirements of ASTM C1714 Standard Specification for Preblended Dry Mortar Mix for Unit Masonry; ASTM C270 Standard Specification for Mortar for Unit Masonry; ANSI 118.4 Standard Specifications for Modified Dry-Set Cement Mortar; and ACI 530 Shear Bond Standards.
-
Tenon® Masonry Veneer Mortar HB
Tenon® Masonry Veneer Mortar HB (High Bond) (BOM #120462) is a high-performance, non-sag, fiber-reinforced, polymer-modified bonding mortar for installing real or manufactured masonry veneer units. Masonry Veneer Mortar HB is a blend of cementitious materials, oven-dried sand, and special performance admixtures to create a professional strength mortar. This high-yield mortar allows for the same coverage as a traditional 50 lb. bag in a lighter-weight 40 lb. size. Meets or exceeds the requirements of ANSI A118.4 Standard Specifications for Dry-Set Cement Mortar (unmodified mortar); ANSI A118.11 Standard Specifications for EGP (Exterior Glue Plywood) Latex-Portland Cement Mortar (mortar which will bond to plywood); ANSI A118.15 Standard Specifications for Improved Modified Dry-Set Cement Mortar (improved modified mortar); and ASTM C270 Standard Specification for Mortar for Unit Masonry.