1 gal.

Tenon^® 40% Silane Sealer

Tenon® 40% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect, and seal fully cured fresh concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. 40% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129870), 5 gal. pails (BOM #129860), and 55 gal. drums (BOM #129597). 

Tenon^® 40% Silane Sealer WB

Tenon® 40% Silane Sealer WB is a VOC-compliant, clear, non-yellowing concrete sealer that penetrates deeply and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and spalling, freeze damage, and rebar corrosion due to moisture interaction. It is suitable for use to protect and seal fully cured new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. 40% Silane Sealer WB is designed for use above-grade exterior applications that are not subjected to hydrostatic pressure. Available in 1 gal. bottles (BOM #114417), 5 gal. bottles (BOM #114427), and 55 gal. drums (BOM #114415). 

Tenon^® Burnished Block Sealer WB Matte

Tenon® Burnished Block Sealer WB Matte is used as a final sealer on masonry block walls, including burnished block or ground face block, architectural block, brick, slate, paving stones, terrazzo, quarry tile, and cementitious materials. It enhances the beauty of the surface, giving it a rich, wet look without the gloss. It forms a breathable membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, plus is protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with a durable polysiloxane that does not yellow when exposed to the sun's UV rays. Available in 1 gal. bottles (BOM #130090), 5 gal. pails (BOM #130080), and 55 gal. drums (BOM #129695).

Tenon^® Cure & Seal ES

Tenon® Cure & Seal ES is a clear, non-yellowing, fast-drying acrylic compound. No fillers, oils, waxes, or saponifiable resins are contained in the mixture. It is used for curing and sealing of freshly placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Cure & Seal ES forms a membrane film on new concrete to seal and retain hydration water, providing maximum hardness of the substrate, resistance to abrasion, and resistance to damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases. Cure & Seal ES will also benefit existing concrete by penetrating into the slab, binding together the small dusting particles, while filling the voids to produce a non-porous, dust-free, brighter surface.   When used on terrazzo, brick, stone, and architectural concrete, it brings out the highlights plus enriches and enhances the natural colors found in the material. Available in 1 gal. bottles (BOM #113310), 5 gal. pails (BOM #113320), and 55 gal. drums (BOM #113308). 

Tenon^® Dissipating Cure WB +PLUS

Tenon® Dissipating Cure WB +PLUS is a water-based, clear resin, liquid-membrane-forming curing compound with silane used for moisture retention of freshly placed concrete. Designed for interior or exterior applications where a dissipating or easily removed curing compound is required. It is particularly recommended for applications where greater moisture retention is required. Dissipating Cure WB +PLUS will pass all VOC-compliance laws. Available in 1 gal. bottles (BOM #114437), 5 gal. pails (BOM #114447), 55 gal. drums (BOM #114457), and 275 gal. totes (BOM #114467).

Tenon^® Restoration Cleaner

Tenon® Restoration Cleaner is a phosphoric acid product that dissolves and removes efflorescence (white mineral deposits) and rust stains from concrete surfaces, masonry units, pavers, brick, etc. This product is recommended to be used before applying a sealer to the surface of concrete or masonry and enables the sealer to penetrate and seal more effectively. Restoration Cleaner may be used to prepare the surface of concrete or masonry prior to using Tenon® repair products. Available in 1 gal. bottles (BOM #120523) and 5 gal. pails (BOM #120524).

Tenon^® Salt Barrier ES

Tenon® Salt Barrier ES (Exempt Solvent) is designed to protect and extend the life of concrete, masonry, pavers, retaining walls, and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier ES provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surface. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete to protect against moisture penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Salt Barrier ES is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #113370), 5 gal. pails (BOM #113360), and 55 gal. drums (BOM #113358).

Tenon^® Set Retarder

Tenon® Set Retarder is a ready-to-use liquid admixture that slows the rate of reaction for rapid-setting concrete repair products, including:

• Tenon® Commercial DOT Repair
• Tenon® Rapid Patch 100
• Tenon® Rapid Patch 200
• Tenon® Vertical Repair CI
• Tenon® Rapid Strength Concrete Mix SE
• Tenon® Blend-Pro

It is intended for use with these products in conditions where warm weather or other situations require extended working time for proper placement and finishing. It meets ASTM C494/C 494M (Standard Specification for Chemical Admixtures for Concrete) requirements for Type B retarding admixtures. For use with all other mixes, please contact info@tccmaterials.com to speak to a technical representative. Available in 1 gal. bottles (BOM #130030) and 5 gal. pails (BOM #130040). 

Tenon^® Surface Renew

Tenon® Surface Renew is a clear cleaning solution to revitalize and rejuvenate aged, sealed concrete.  

Tenon^® Trowel Ice

Tenon® Trowel Ice is a VOC-compliant finishing aid that enhances physical concrete surface performance, while aiding in faster and easier surface finishing.  Trowel Ice is reactive colloidal silicate densifier that lubricates freshly placed concrete, prolonging workability in adverse conditions, such as high wind, low humidity, or high ambient temperatures. Available in 1 gal. ready-to-use bottle (BOM #114864), 5 gal. ready-to-use pail (BOM #114866), 55 gal. ready-to-use drum (BOM #115195), 275 gal. ready-to-use tote (BOM #115196), 1 gal. concentrated bottle (BOM #114865), and 5 gal. concentrated pail (BOM #114867).

Tenon^® Ultimate Barrier

Tenon® Ultimate Barrier is a clear, non-yellowing, fast-drying acrylic-silicone blended concrete sealer for curing, dustproofing, and weatherproofing of freshly placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Ultimate Barrier is designed to be a single application for curing, sealing, and weatherproofing. It forms a membrane film on new concrete to seal and retain hydration water, providing optimum curing of the substrate, resistance to abrasion and damage caused by salt, oil, grease, mild acids, alkali, as well as stains from soot, smog, fumes, and gases. Ultimate Barrier reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to cure, protect, and seal fully cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. Available in 1 gal. bottles (BOM #113841), 5 gal. pails (BOM #113821), and 55 gal. drums (BOM #113875).

Tenon^® Ultimate Barrier ES

Tenon® Ultimate Barrier ES is a VOC-compliant, clear, non-yellowing, fast-drying, acrylic-silicone blended concrete sealer for curing, dustproofing, and weatherproofing of freshly placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Ultimate Barrier ES is designed to be a single application for curing, sealing, and weatherproofing. It forms a membrane film on new concrete to seal and retain hydration water, providing optimum curing of the substrate, resistance to abrasion and damage caused by salt, oil, grease, mild acids, alkali, and stains from soot, smog, fumes, and gases. Ultimate Barrier ES reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to cure, protect, and seal fully cured new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. Available in 1 gal. bottles (BOM #114163), 5 gal. pails (BOM #114173), and 55 gal. drums (BOM #114164).

Tenon^® X-Tender

Tenon^® X-Tender is a VOC-compliant concentrate (mixed 1 part concentrate to 9 parts water) that creates a sprayable monomolecular polymer film when properly sprayed to freshly placed concrete.  X-Tender is specifically designed to minimize rapid moisture loss from concrete surfaces prior to curing. Available in a 1 gal. bottles (BOM #114871) and 5 gal. pails (BOM #114872).

Tenon^® Xylene

Tenon® Xylene is a cleaning solvent for tools, sprayers, and equipment used in concrete and masonry construction. Xylene may also be used to soften previously applied acrylic sealers. Available in 1 gal. bottles (BOM #113440) and 5 gal. pails (BOM #113460). 

Tenon^® Air Entrainment

Tenon® Air Entrainment is a ready-to-use, aqueous solution made of organic materials. Air Entrainment entrains a small and stable amount of air into the desired mix. These small, stable air voids enhance the mixture and improve workability. Its chemical composition and physical properties make it ideal for many construction applications. It is intended for use when increased workability and freeze-thaw durability of concrete or mortar is preferred. This admixture also improves resistance to freeze/thaw, scaling, segregation, and bleeding as well as improves strength, plasticity, water retention, and cohesiveness of mortar. Meets ASTM C260 Standard Specification for Air-Entraining Admixtures for Concrete. Available in 1 gal. bottles (BOM #120377), 5 gal. pails (BOM #120879), and 55 gal. drums (BOM #130070). 

Tenon^® SuperFlow

Tenon® SuperFlow admixture is a full-range, water-reducing additive providing a more plastic and flowable concrete. It produces concrete mixes with different levels of workability to include self-consolidating concrete (SCC) applications. SuperFlow admixture meets ASTM C494/C 494M (Standard Specification for Chemical Admixtures for Concrete) compliance requirements for Type A water-reducing and Type F high-range water-reducing admixtures. Available in 1 gal. bottles (BOM #113500), 5 gal. pails (BOM #113510), and 55 gal. drums (BOM #113434).

Tenon^® Burnished Block Sealer

Tenon® Burnished Block Sealer is used as a final sealer on masonry block walls, including burnish block or ground face block, architectural block, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Burnished Block Sealer enhances the beauty of the surface, giving it a rich, wet-look sheen. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with a blend of methacrylate polymers, this aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays. Available in 1 gal. bottles (BOM #121100), 5 gal. pails (BOM #129530), and 55 gal. drums (BOM #121101).

Tenon^® Burnished Block Sealer WB

Tenon® Burnished Block Sealer WB is used as a final sealer on masonry block walls including burnished block or ground face block, architectural block, brick, slate, paving stones, terrazzo, quarry tile, and cementitious materials. Burnished Block Sealer WB enhances the beauty, giving the surface a rich, wet-look sheen. It forms a breathable membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion, plus it protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Made with an acrylic that does not yellow when exposed to the sun's UV rays. Available in 1 gal. bottles (BOM #121110), 5 gal. pails (BOM #121107), and 55 gal. drums (BOM #121113).

Tenon^® Concrete & Masonry Sealer WB

Tenon® Concrete & Masonry Sealer WB is a water-based sealer that penetrates and reacts chemically within the capillaries of the concrete or masonry, bonding to the silica in the substrate to protect against moisture penetration, water-related staining, atmospheric chemicals, and deterioration. It is used to protect and seal clean, dry, coating-free, fully cured concrete, brick masonry, concrete masonry units, stucco, stone terrazzo, architectural concrete, and some natural stones. For above-grade exterior applications that are not subject to hydrostatic pressure. Ready-to-use, this low VOC, silane/siloxane emulsion is especially suited for applications where VOC regulations for AIM coatings prevent the use of solvent-borne products. Available in 1 gal. bottles (BOM #120673) and 5 gal. pails (BOM #120674).

Tenon^® Concrete & Masonry Dissolver

Tenon® Concrete & Masonry Dissolver is an environmentally friendly liquid alternative to aggressive acid concrete removers. Use to safely dissolve and remove cured concrete, mortar, grout, and stucco build-up from tools, concrete forms, job mixers, hardware, shoring, and more. Available in 28 oz. bottles (BOM #121006), 1 gal. bottles (BOM #120911), 5 gal. pails (BOM #120912), and 55 gal. drums (BOM #121105). 

Tenon^® Concrete Surface Retarder

Tenon® Concrete Surface Retarder is a water-based, Formula S mixture that is applied to freshly placed concrete applications to chemically delay the setting of the mortar at the surface of the concrete. This allows the top layer of cement paste to be flushed away, creating an exposed aggregate decorative finish without damaging the integrity of the concrete slab. A stream of water or scrubbing with a stiff brush is used to create the decorative texture. Surface Retarder can also be used on concrete to roughen or open the surface to improve the bonding for coatings or toppings. Available in 1 gal. bottles (BOM #121117) and 5 gal. pails (BOM #121118).

Tenon^® Cure & Seal WB 1315

Tenon® Cure & Seal WB 1315 is a film-forming compound that meets ASTM C1315 (Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete) performance standards for water loss when applied properly to cure, seal, and harden freshly placed concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. Cure & Seal WB 1315 will pass all VOC-compliance laws and is formulated to cure, seal, protect, and dustproof concrete, as well as seal many types of porous tile and resilient floors. Designed for both exterior and interior applications, it is particularly recommended for indoor work in public buildings (for example, hospitals and restaurants) and private residences where solvent-based systems are difficult to use. The white solution dries clear and provides a dust-free surface. This product provides maximum hardness to the concrete as well as resistance to traffic abrasion. Construction debris are easier to clean. Compatible with most tile and carpet adhesives. Available in 1 gal. bottles (BOM #129910), 5 gal. pails (BOM #129920), and 55 gal. drums (BOM #129930).

Tenon^® Cure & Seal

Tenon® Cure & Seal is a non-yellowing, fast-drying acrylic compound used for curing, sealing, and hardening of freshly placed and/or existing concrete. Enhances colors and darkens the appearance of concrete, brick, stone, terrazzo, and exposed aggregate. Available in 1 gal. bottles (BOM #120839), 5 gal. pails (BOM #120838), or 55 gal. drums (BOM #120932).

Tenon^® Cure & Seal WB

Tenon® Cure & Seal WB is a clear, non-yellowing, acrylic polymer membrane-forming compound used for curing, sealing, and hardening of freshly placed and/or existing concrete, terrazzo, brick, stone, architectural concrete, and other cementitious materials. It is a waterborne mixture that is VOC-compliant.  Available in 1 gal. bottles (BOM #120823), 5 gal. pails (BOM #120822), and 55 gal. drums (BOM #120824).

Tenon^® Fast-Set Liquid Activator

Tenon® Fast-Set Liquid Activator is formulated specifically to be used in conjunction with Tenon® Air-Entrained Concrete Patching Mix AE in order to establish a quicker set and develop strength rapidly. When used with the patching mix, Fast-Set Liquid Activator reduces the closure time of high-traffic areas from 24 hours to 4-5 hours under normal conditions. Available in 1 gal. bottles (BOM #120593) and 5 gal. pails (BOM # 120770).

Tenon^® Level-Flo^® Primer Pro

Tenon® Level-Flo Primer Pro is a high quality, acrylic latex-based primer used with Tenon® Level-Flo self-leveling products. Level-Flo Primer Pro is applied to porous and nonporous surfaces as a substrate primer to promote bonding. This primer can also be used with other cement-based Tenon concrete repair, surface preparation, and polymer-modified thin set mortars to enhance bonding to difficult substrates such as glazed ceramic tile, terrazzo, gypsum-based underlayments, concrete treated with certain types of curing compounds (acrylic resin or silicate curing compounds only), well bonded epoxy coatings, and cold rolled steel. Level-Flo Primer or Primer Pro are required to be applied to all substrates before placing Tenon® Level-Flo Underlayments or Wear-Toppings. Available in 1 gal. bottles (BOM #129436) and 5 gal. pails (BOM #129438). 

Tenon^® Mighty Bond^™

Tenon® Mighty Bond™ is a high-solids, acrylic, liquid bonding agent that substantially improves adhesion, impact, and shear bond, tensile, and flexural and compressive strength of unmodified concrete, mortars, patches, and grouts. Additionally, Mighty Bond adds excellent freeze/thaw and salt resistance and creates more durable cement-based materials. Minimal preparation is required. Available in 1 gal. bottles (BOM #120525), 5 gal. pails (BOM #120526), and 55 gal. drums (BOM #130020).

Tenon^® Paver Guardian

Tenon® Paver Guardian is designed to protect and extend the life of installed pavers without changing the finished look. Paver Guardian provides a natural finish that maintains the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete to protect against moisture penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion, as well as protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Paver Guardian is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129670), 5 gal. pails (BOM #129660), and 55 gal. drums (BOM #129534).

Tenon^® Paver Guardian WB

Tenon® Paver Guardian WB is designed to protect and extend the life of installed pavers, retaining walls, and other cementitious surfaces without affecting the finished look. Paver Guardian WB provides a natural finish that maintains the original look of pavers, concrete, architectural concrete, brick, natural stone, and other cementitious materials. This clear, waterborne formula penetrates and reacts chemically within the capillaries of the surface to protect against deicing salts, moisture penetration, spalling, freeze-thaw damage, efflorescence, and chemical erosion. Paver Guardian WB also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Paver Guardian WB is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129780), 5 gal. pails (BOM #129790), and 55 gal. drums (BOM #129567).

Tenon^® Paver Seal

Tenon® Paver Seal is designed to protect and extend the life of installed pavers, while enhancing the color and adding a matte finish. Made with a blend of methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, architectural concrete, brick, natural tile, and other cementitious materials. Paver Seal will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate yet it keeps a matte finish. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129730), 5 gal. pails (BOM #129720), and 55 gal. drums (BOM #129551).

Tenon^® Paver Seal Pro WB

Tenon® Paver Seal Pro WB is a penetrating, breathable, waterborne sealer designed to protect and extend the life of installed pavers, while enhancing the color with a natural, non-gloss finish. Made with a durable polysiloxane that does not yellow when exposed to the sun's UV rays, it penetrates deep in the capillaries of the paving stones for increased protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. Paver Seal Pro WB will enhance the beauty of pavers, stone veneer, and architectural concrete by making colors more vibrant while protecting surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants, and making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129770), 5 gal. pails (BOM #129760), and 55 gal. drums (BOM #129563).

Tenon^® Paver Seal & Shine

Tenon® Paver Seal & Shine is designed to protect and extend the life of installed pavers, while enhancing color and adding a gloss finish. Made with a blend of methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on concrete, architectural concrete, brick, natural stone, and other cementitious materials. Paver Seal & Shine will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate by giving it a rich, wet-look gloss. It provides a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129690), 5 gal. pails (BOM #129680), and 55 gal. drums (BOM #129539).

Tenon^® Paver Seal & Shine Pro WB

Tenon® Paver Seal & Shine Pro WB is a penetrating, breathable, waterborne sealer designed to protect and extend the life of installed pavers, while enhancing the color and adding a wet-look gloss. Made with a durable acrylic that does not yellow when exposed to the sun's UV rays, it penetrates deep in the capillaries of the paving stones for increased protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. Paver Seal & Shine Pro WB will enhance the beauty of pavers, colored or stamped concrete, or exposed aggregate by giving it a wet-look finish while protecting surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants and making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129710), 5 gal. pails (BOM #129700), and 55 gal. drums (BOM #129545). 

Tenon^® Paver Seal Ultra Shine

Tenon® Paver Seal Ultra Shine is a high-solids, low-viscosity, sprayable sealing agent designed to protect and extend the life of installed pavers, while enhancing color and adding a high-gloss, wet-look finish. Made with a blend of 100% methacrylate polymers, this solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on architectural concrete, brick, natural stone, and other cementitious materials. Paver Seal Ultra Shine will enhance the beauty and vibrancy of colored or stamped concrete and exposed aggregate, giving it a rich, high-gloss finish. It forms a membrane to increase protection from damaging freeze-thaw cycles, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, oil, grease, foods, and airborne pollutants while making these surfaces easier to clean. Available in 1 gal. bottles (BOM #129750), 5 gal. pails (BOM #129740), and 55 gal. drums (BOM #129556).

Tenon^® Paver Wash

Tenon® Paver Wash is a mild, phosphoric product that dissolves and removes efflorescence (white mineral deposits) and rust stains from pavers and other cementitious or clay surfaces. This product is recommended to be used before applying a sealer to the surface of pavers in order to enable the sealer to penetrate and seal more effectively. Available in 1 gal. bottles (BOM #129800) and 5 gal. pails (BOM #129810).

Tenon^® Salt Barrier

Tenon® Salt Barrier is designed to protect and extend the life of concrete, masonry, pavers, retaining walls, and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surfaces. This clear, solvent-based formula penetrates and reacts chemically within the capillaries of the concrete. This product protects against moisture penetration, spalling, freeze-thaw damage, deicing salts, efflorescence, and chemical erosion. It also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making those surfaces easier to clean. Salt Barrier is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129820), 5 gal. pails (BOM #129830), and 55 gal. drums (BOM #129585).

Tenon^® Salt Barrier WB

Tenon® Salt Barrier WB is designed to protect and extend the life of concrete, masonry, pavers, retaining walls, and other cementitious surfaces by protecting from the damaging effects of salt and de-icing chemicals without affecting the finished look. Salt Barrier WB provides a natural finish that maintains the original appearance of driveways, patios, garage floors, block walls, and other concrete or masonry surfaces. This clear, water-based formula penetrates and reacts chemically within the capillaries of the surface to protect against deicing salts, moisture penetration, spalling, freeze-thaw damage, efflorescence, and chemical erosion. Salt Barrier WB also protects surfaces from most chemicals, dirt, acids, alkali, and airborne pollutants while making these surfaces easier to clean. Salt Barrier WB is used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129840), 5 gal. pails (BOM #129850), and 55 gal. drums (BOM #129587).

Tenon^® Set Accelerator

Tenon® Set Accelerator is a Type C, non-chloride, non-corrosive liquid that improves workability and initial strength while it reduces the hydration time of cement. The product is recommended for use during cooler weather to accelerate set time and reduce the risk of frozen mortar and concrete mixes. It is also recommended for use when early strength gain is desired to speed up projects. Set Accelerator provides a reduced curing time, faster set time, and increased early strength. The product speeds finishing operations in any weather condition without any corrosive effects. Meets or exceeds ASTM C494 Standard Specification for Chemical Admixtures for Concrete. Available in 1 gal. bottles (BOM #120376) and 5 gal. bottles (BOM #129641).

Tenon^® 100% Silane Sealer

Tenon® 100% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry in order to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect and seal fully cured fresh concrete, cast in place, precast, and high-strength concrete materials. 100% Silane Sealer is used for above-grade exterior applications that are not subject to hydrostatic pressure. It is excellent for treating high-traffic areas or surfaces that receive high salt concentrations such as coastal piers. Available in 1 gal. bottles (BOM #129890), 5 gal. pails (BOM #129900), and 55 gal. drums (BOM #129652). 

Tenon^® 20% Silane Sealer

Tenon® 20% Silane Sealer is a clear, solvent-based concrete sealer that penetrates deep into and reacts chemically within the capillaries of the concrete or masonry to protect against moisture penetration and the spalling, freeze damage, and rebar corrosion that moisture can cause. It is suitable for use to protect, and seal fully cured, new concrete, existing concrete, stucco, architectural concrete, and other cementitious materials. Silane sealers are used for above-grade exterior applications that are not subject to hydrostatic pressure. Available in 1 gal. bottles (BOM #129980), 5 gal. pails (BOM #129970), and 55 gal. drums (BOM #129644). 

Tenon^® Siloxane Final Seal

Tenon® Siloxane Final Seal is an aromatic, solvent-based concrete sealer and water-repellant used to protect cementitious surfaces against the damage caused by water penetration. Can be applied to surfaces where a cure and seal coating was previously applied. Available in 1 gal. bottles (BOM #120828), 5 gal. pails (BOM #120827), and 55 gal. drums (BOM #120829).

Tenon^® Siloxane Sealer

Tenon® Siloxane Sealer is a clear, solvent-based sealer for concrete and cementitious materials. It penetrates and reacts chemically within the capillaries to repel water and protect from the damaging effects of rain, water penetration, chemicals, salt, freeze-thaw cycles, and smog. Provides natural-looking, non-yellowing, invisible protection.  Available in 1 gal. bottles (BOM #120826), 5 gal. pails (BOM #120825), and 55 gal. drums (BOM #120934).

Tenon^® Super Clear Coat

Tenon® Super Clear Coat is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic solvent-based coating does not yellow when exposed to the sun’s UV rays and can also be used as a final sealer on burnished block, architectural concrete, brick, slate, paving stone, terrazzo, quarry tile, and cementitious materials. Enhances the colors of the surfaces with a rich, wet-look sheen. Available in 1 gal. bottles (BOM #120831), 5 gal. pails (BOM #120830), and 55 gal. drums (BOM #120832).

Tenon^® Super Clear Coat Matte

Tenon® Super Clear Coat Matte is used for curing and sealing exposed aggregate and sealing colored concrete. This aromatic, solvent-based sealer does not yellow under the sun's UV rays. It enhances the beauty of colored or stamped concrete and exposed aggregate yet keeps a matte, low-gloss finish. Available in 1 gal. bottles (BOM #120834) and 5 gal. pails (BOM #120833).

Tenon^® Super Diamond Glaze

Tenon® Super Diamond Glaze is a higher viscosity version of Super Clear Coat used for curing and sealing exposed aggregate and sealing colored concrete. Enhances the beauty and depth of the surface, giving it a rich, wet-look high gloss while protecting from the damages caused by moisture penetration. Available in 1 gal. bottles (BOM #120836), 5 gal. pails (BOM #120835), and 55 gal. drums (BOM #120837).

Tenon^® Waterproofing & Crack Isolation Membrane

Tenon® Waterproofing & Crack Isolation Membrane is an advanced latex polymer-based technology used as a professional grade waterproofing underlayment membrane or as part of a crack isolation system. Salmon color when applied; dries to dark orange. Available in 1 gal. pails (BOM #120675) and 5 gal. pails (BOM #120676).